2
Configure the following parameters:
Table 8-29
ALG parameters
Field
Description
ALG Config
Select the checkboxes to enable the protocols to be supported by the ALG: FTP, TFTP, SIP, H323,
RTSP, L2TP, IPSEC, PPTP.
3
Click
Save ALG
.
4
Configure the following parameters:
Table 8-30
DMZ parameters
Field
Description
WAN Connection List
Select a WAN connection from the list.
Enable DMZ
Select this checkbox to enable DMZ on the selected WAN connection.
DMZ IP Address
Select
Custom Settings
and enter the DMZ IP address or select the IP address of a connected
device from the list.
Figure 8-36
DMZ and ALG page
Configure a XS-2426G-A indoor ONT
Security configuration
Configuring DMZ and ALG
Nokia ONT
Draft
Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
December 2020
134
Issue 1