Table 8-23
QoS Config parameters
Field
Description
QoS Setting
Type
Select a QoS service layer type from the list
L2 Criteria
or
L3 Criteria
.
Classification Criteria
Source MAC
Enter the source MAC address.
Select the
Exclude
checkbox to exclude the source MAC address.
Interface
Select an interface from the list.
Classification Result
DSCP Remark
Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria.
802.1p Remark
Enter the value for the 802.1p (range: 0-7).
Forwarding Policy
Enter the number for the forwarding policy (range: 1-7).
Additional fields for L3 Criteria
Protocol
Select a protocol from the list, or select the
Exclude
checkbox.
Application
Select an application from the list.
Source IP and Source IP
Mask
Enter the values for the source IP and IP mask, or select the
Exclude
checkbox.
Destination IP and
Destination IP Mask
Enter the values for the destination IP and IP mask, or select the
Exclude
checkbox.
Source Port and Source
Port Max
Enter the values for the source port and port max (highest port number) or select the
Exclude
checkbox.
Destination Port and
Destination Port Max
Enter the values for the destination port and port max (highest port number), or select the
Exclude
checkbox.
3
Click
Add
to add a QoS policy.
E
ND OF STEPS
Configure a XS-2426G-A indoor ONT
Network configuration
Configuring QoS
Nokia ONT
Draft
Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
December 2020
124
Issue 1