![Nokia N 80 Скачать руководство пользователя страница 265](http://html.mh-extra.com/html/nokia/n-80/n-80_user-manual_254523265.webp)
• Check the Sweep Mode box.
• Click Tune.
• Setup the signal generator to correspond with the values on the
Rx Calibration
pop-up window and
click OK.
Figure 64 Pop-up window for WCDMA1900
Figure 65 Pop-up window for WCDMA2100
• Ensure Tuning Results are within limits specified in the table above: If values are OK, click Write to save
the values to the phone.
• Close the tuning window.
WCDMA transmitter tunings
Tx AGC & power detector (WCDMA)
Context
Tx AGC & power detector tuning has two purposes:
• to enable the phone to select the correct TxC value accurately in order to produce the required RF level
• to enable the phone to measure its own transmitter power accurately
There are two ways to perform the tuning. For an alternative method, see
Steps
1.
From the Operating mode drop-down menu, set mode to Local.
RM-91; RM-92
RF Troubleshooting and Manual Tuning Guide
Nokia Customer Care
Issue 1
COMPANY CONFIDENTIAL
Page 7 –49
Copyright © 2006 Nokia. All rights reserved.