Nokia Mediamaster 9802 S, Руководство пользователя

Страница: 20 / 50

GB 20
LNB type
• Select Universal, one of the fixed frequencies or enter the LNB
frequency with the numeric buttons on the remote control.
Type of motor
• Select SATSCAN if it is a Nokia SatScan motor.
• Select DiSEqC in case the motor you use is controlled by
DiSEqC commands.
Motor antenna
In case you have an antenna motor to control your satellite an-
tenna you have to make the following settings. If the antenna is
prevented from reaching its predefined east/west limit positions,
you have to set new limits. See page 37 for instructions.
• From the “Antenna/Satellite selection” menu select line 7 (re-
fer to page 13) and press OK .
• Select line 5, “Motor antenna configuration” and press OK .
LNB offset voltage
If the cable down from the antenna is very long, the voltage at
the LNB could be too low to change the polarization. You can in-
crease the voltage to the LNB by 0,5 Volt.
FIRST TIME INSTALLATION
Satellite
Select Astra if you have a SatScan motor and Hotbird if you have
a DiSEqC motor.