Nokia Mediamaster 9650S, Руководство пользователя

Страница: 12 / 27

GB 13
Satellite name:
From here you can select a name for the configuration.
Switch Type:
There are in principle two kinds of external DiSEqC switches on the market at present. One for
connection of two LNBs. The other one for connection of up to 4 LNBs.
If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select “
DiSEqC 1, 2, (3
or 4)
”, for each LNB connected to respective inputs on this switch.
LNB Type
:
Selection is possible for different kinds of LNBs. Select the frequency for the LNB, which is valid for
your combination. You may also enter a value with the numbered buttons on the remote control. The
LNB alternatives are: “
Universal
” (which is the most common), “
5.150
”, “
9.750
”, “
10.000
”,
“
10.050
”, ”
10.600
”, “
10.750
”, “
11.200
”, “
11.475
”.
If you have special LNB type, you should select “User Define” on this menu. And you can enter a new
LNB frequency in the following LNB Frequency menu.
LNB Frequency
:
You can enter a special LNB frequency, which is not presented in the LNB Type list as above.
22KHz Tone Switch
:
If you have connected to a Dual LNB or two antennas connected to a 22KHz tone switch box, set it to
“
Enable
” the 22KHz tone switch.
When you have finished the settings in this menu, press the “OK” button to save the parameter.
Press
BACK
to continue with the channel search set-up
(You can also recall this menu later. From the Main Menu; select “Installation” and then “Antenna
Satellite Configuration”).
Highlight “
Automatic Channel Search
” using the down arrow
button on the remote control. Mediamaster has pre-
programmed Antenna/Satellite parameters for
Astra
,
HotBird
,
Arabsat
,
NileSat
,
PanAmsat 4
,
AsiaSat2
,
AsiaSat3
,
TurkSat1B
,
TurkSat1C
,
Thor
and
Other1
to
Other7
.
Antenna Alternative
: Select the option, “
1
to
16
”, that
corresponds to your antenna system.
Predefined Channel
: Each antenna alternative has one or two pre-programmed channel parameters.
Choose a channel from which you want to start the channel search. Normally, each of the pre-
programmed channels gives the same result.
Search Type
: Select “
Free Channels
” in order to search for free channels only.
Select “
All Channels
” in order to search all channels on the satellite.
Automatic Channel Search