Settings
Select
>
Tools
>
Settings
.
You can define and modify various settings of your
device. Modifying these settings affects the operation
of your device across several applications.
Some settings may be preset for the device or sent to
you in a special message by your service provider. You
may not be able to change such settings.
Select the setting you want to edit to do the following:
•
Switch between two values, such as on or off.
•
Select a value from a list.
•
Open a text editor to enter a value.
•
Open a slider to decrease or increase the value by
scrolling left or right.
General settings
Select
>
Tools
>
Settings
>
General
.
Select from the following:
•
Personalization
— Change the display settings and
personalize the device.
•
Date and time
— Change the date and time.
•
Enhancement
— Define the settings for your
enhancements.
•
Security
— Define the security settings.
•
Factory settings
— Restore the original settings of
the device.
Personalization settings
Select
>
Tools
>
Settings
>
General
>
Personalization
.
Display settings
To define the level of light that the device needs before
switching on the backlight, select
Display
>
Light
sensor
.
To change the text size, select
Display
>
Font size
.
To adjust the length of time the display can be left idle
before the screen saver is activated, select
Display
>
Power saver time-out
.
To select a welcome note or logo for the display, select
Display
>
Welcome note / logo
. You can either choose
the default welcome note, enter your own text, or select
an image.
To set how quickly the display dims after the last
keypress, select
Display
>
Light time-out
.
To set the active application to continue on the cover
display when you close the communicator, select
Display
>
{No display_text mapping for
'qtn_set_display_cover_to_desk.gsdisplplugindelta',
locale='en'}
>
{No display_text mapping for
'qtn_set_display_desk_off.gsdisplplugindelta',
locale='en'}
.
83
Settings
file:///C:/USERS/MODEServer/lkatajis/11051417/ra-6_maxi/en/issue_1/ra-6_maxi_en_1.xml
Page 83
Jan 8, 2007 1:39:30 PM