
Connect signal generator to RF connector and use appropriate frequency for each channel.
Steps
1. In Phoenix select Testing
→
WCDMA
→
RX Power measurement . The Rx Power Measurement window
opens.
Figure 45 Phoenix Rx Power Measurement window
2. In the RX Power measurement window, select:
•
Mode: RSSI
•
Continuous mode
3. Click Start to perform the measurement.
Note:
WCDMA RSSI measurement is accurate only with WCDMA modulated signal.
RM-632; RM-634; RM-699
Service information differences between RM-632 and
RM-634
Issue 3
COMPANY CONFIDENTIAL
Page 6 – 9
Copyright © 2010 Nokia. All rights reserved.
Содержание E5-00
Страница 113: ...4 RF troubleshooting Nokia Customer Care Issue 3 COMPANY CONFIDENTIAL Page 4 1 Copyright 2010 Nokia All rights reserved ...
Страница 141: ...5 System Module Nokia Customer Care Issue 3 COMPANY CONFIDENTIAL Page 5 1 Copyright 2010 Nokia All rights reserved ...
Страница 181: ...Glossary Nokia Customer Care Issue 3 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2010 Nokia All rights reserved ...