Nokia Check Point IP2450, Руководство по установке

Страница: 112 / 136

7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
112 Check Point IP2450 Security Platform Installation Guide
The top of the DIMM is smooth. The bottom edge has two different-length sets of contacts,
which mate with the slots on the socket. Be sure the contacts and slots are properly aligned
before you insert the DIMM.
The retaining clips move into the lock position as you press the DIMM into place.
7. Slide the chassis assembly back into the appliance until it clicks into place.
8. Resecure the four chassis assembly retaining screws.
9. Press the power switches, located on each power supply at the back of the appliance, to turn
on the power to the appliance.
The IP2450 automatically recognizes the new memory configuration. You can verify the
configuration by using Check Point Network Voyager or the CLI.
Installing or Replacing a Fan Unit
The fan unit is hot swappable. You can remove and install the fan unit on the back of the IP2450
without shutting the appliance down.
Before You Begin
To replace a fan unit, you need:
„
Physical access to the IP2450 appliance.
„
Replacement fan unit kit and appropriate documentation.
0635