Nokia A032 Скачать руководство пользователя страница 75

Страница: 75 / 218

Command line interface

At the

Password:

prompt, enter your

password. The factory default password is

default

. It’s best to change this as soon as

possible – see

Management functions

page 79.

You’ll now see the following prompt in the
Telnet window:

CMD:

You’re now ready to enter commands.

Setting the time and date

You can use the commands

time

and

date

update the Nokia A032.

To set the time, enter the following:

time hh:mm:ss

where:

= hours (0 – 23)

= minutes (0 – 59)

= seconds (0 – 59)

To set the date, enter the following:

date mm/dd/yyyy

(or

dd/mm/yyyy

in Europe)

where:

= month (1 - 12)

= date (1 - 31)

yyyy

= year

The effect of the commands is immediate and
the clock is updated with the new values. The
clock will continue to keep time regardless of
whether the unit is powered on or off.

A032-Adv.book Page 69 Monday, November 13, 2000 10:47 AM

Содержание A032



























































































































































































































Результаты поиска

Содержание A032

Отзывы:

Nokia A032, Руководство пользователя, Страница: 75 / 218

Результаты поиска

Содержание A032

Отзывы: