Figure 46 Vibra
AV connector
The 3.5mm AV connector consists of mono or stereo audio output, mono audio input and optional features
like control data over microphone line.
A connected male connector is detected on pin 6 (PLUG_DET).
Accessories are detected as basic headset (no ECI) or as intelligent ECI communication devices.
Note:
Only use an approved cable for connecting to the AV connector ( e.g. headset HS-47).
Figure 47 AV connector pin layout
Table 14 AV connector pins
Pin
Signal name
Direction
Description
1, 2
HS_ GND
-
Ground contacts
3
HS_MIC
Input
Multiplexed microphone audio and control
data/muxed: MIC2P and ACI, control: GenIO34
4
HS_EAR_R
Output
Audio output (XEAR_R)
5
HS_EAR_L
Output
Audio output (XEAR_L)
6
PLUG_DET
Input
Terminal internal connection, plug detection/
GenIO 33
RM-598; RM-604
System Module
Page 5 –22
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2009 Nokia. All rights reserved.
Содержание 7230
Страница 103: ...4 RF Troubleshooting Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 4 1 Copyright 2009 Nokia All rights reserved ...
Страница 135: ...5 System Module Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page 5 1 Copyright 2009 Nokia All rights reserved ...
Страница 159: ...Glossary Nokia Customer Care Issue 1 COMPANY CONFIDENTIAL Page Glossary 1 Copyright 2009 Nokia All rights reserved ...