143
Copyright © 2005 Nokia. All rights reserved
.
To prevent line selection, select
Line change
→
Disable
if supported by your SIM
card. To change this setting, you need the PIN2 code.
Connection settings
Select
Connection settings
.
Access points
Here you can see a short explanation for every setting that may be needed for
different data connections and access points. If you have not yet used your phone
to make a WAP connection, you may need to contact your service provider for
assistance with the first-time connection.
Many service providers require you to use an IAP for your default access point.
Other service providers allow you to use a WAP access point. Contact your service
provider for more information.
Start to fill in the settings from the top since, depending on the data connection
you select (
Data bearer
), only certain fields are available.
•
Connection name
- Give a descriptive name for the connection.
•
Data bearer
- The options are
GPRS
or
Data call
. Depending on what data
connection you select, only certain setting fields are available. Fill in all fields
marked with
Must be defined
, or with an asterisk. Other fields can be left
empty, unless you have been instructed otherwise by your service provider.
To be able to use a data connection, the network operator or service provider must
support this feature, and if necessary, activate it for your SIM card