manualshive.com logo in svg

Nokia 2630 RM-298, Руководство по обслуживанию

Поделиться
Скачать
Nokia 2630 RM-298 Скачать руководство пользователя страница 33

PK-1

Software protection

key

PK-1 is a hardware protection key with a USB interface. It has the same

functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register

the dongle in the same way as the PKD-1 series dongle.

PKD-1

SW security device

SW security device is a piece of hardware enabling the use of the

service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the

device if needed.

RJ-200

Soldering jig

The jig is used for soldering and as a rework jig for the system module.

It is made of lead-free rework compatible material.

RJ-51

Rework jig

To be used with ST-30!

RJ-72

Rework jig

To be used with rework stencil ST-32.

RM-298; RM-299

Service Tools and Service Concepts

Issue 1

COMPANY CONFIDENTIAL

Page 2 –11

Copyright © 2007 Nokia. All rights reserved.

Содержание 2630 RM-298















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды