Nokia 002F581, Руководство пользователя

Страница: 117 / 144

network. To use e-mail and multimedia services or to
browse web pages, you must first define access points for
these services.
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
To create a new access point, select
Options
>
New
access point or select an existing access point from the
list and then Options
>
Duplicate access point to use
the access point as a basis for the new one.
Packet data (GPRS) settings
Select Menu
>
Tools
>
Settings
>
Connection
>
Packet data .
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections remain
active, for example, during voice calls. See "Connection
manager", p. 100.
To define the packet data settings, select Packet data
connection and select When available to register the
device to the packet data network when you switch the
device on in a supported network, or When needed to
establish a packet data connection only when an
application or action requires it. Select Access point and
enter the access point name provided by your service
provider to use the device as a packet data modem to your
computer. To use a high-speed data connection, select
High speed packet access
>
Enabled .
These settings affect all access points for packet data
connections.
WLAN settings
Select Menu
>
Tools
>
Settings
>
Connection
>
Wireless LAN .
To have an indicator displayed when there is a WLAN
available in your current location, select Show WLAN
availability
>
Yes .
To select the interval for your device to scan for available
WLANs and update the indicator, select Scan for
networks . This setting is not available unless you select
Show WLAN availability
>
Yes .
Advanced WLAN settings
Select Options
>
Advanced settings . The advanced
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select
Automatic
configuration
>
Disabled , and define the following:
• Long retry limit — Enter the maximum number of
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
• Short retry limit — Enter the maximum number of
transmission attempts if the device does not receive a
clear-to-send signal from the network.
• RTS threshold — Select the data packet size at which
the WLAN access point device issues a request to send
before sending the packet.
117
Se
ttings