Nokia 002F581, Руководство пользователя

Страница: 114 / 144

Date and time settings
Select Menu
>
Tools
>
Settings
>
General
>
Date and
time .
To set the current date and time, select Date and Time .
To define your time zone, select Time zone .
To update the time, date, and time zone information
automatically (network service), select Network
operator time
>
Auto-update .
To select whether to use the 12-hour or 24-hour clock
system and with which symbol to separate hours and
minutes, select Time format and Time separator .
To determine the date format and separator, select Date
format and Date separator .
To define the clock type, select Clock type
>
Analogue
or Digital .
To select the tone for the alarm clock, select Clock alarm
tone .
To determine the week days that are work days for you,
select Workdays .
Enhancement settings
Select Menu
>
Tools
>
Settings
>
General
>
Enhancement .
Common enhancement settings
With most enhancements, you can do the following:
To determine which profile is activated when you attach
an enhancement to your device, select the enhancement
and Default profile .
To let the device answer phone calls automatically after 5
seconds when an enhancement is attached, select
Automatic answer
>
On . If the ringing type is set to
Beep once or Silent in the selected profile, the automatic
answer is disabled.
To illuminate the device while it is attached to an
enhancement, select Lights
>
On .
E-mail key settings
To select which mailbox to open with the e-mail key, select
E-mail key settings
>
E-mail key , and press the scroll
key.
Security settings
Select Menu
>
Tools
>
Settings
>
General
>
Security .
Define the following security settings:
• Phone and SIM card — Adjust the security settings for
your device and SIM card.
• Certificate management — Manage your security
certificates.
• Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
114
Se
ttings