Nodal Ninja Fanotec MECHA Скачать руководство пользователя страница 76

Страница: 76 / 109

MECHA User’s Guide

v.05.4

‒

Dual Axis

ZZ,NN,HZ

Example of par�al panorama with explicit intervals for H (24°) and V (36°) in
Horizontal Zig Zag, 4 rows, 8 columns:

SL,54x8^24,18x8^24,-18x8^24,-54x8^24,HZ

Download more Presets from server

In short, to download presets from server, make sure MECHA is connected
to the Internet, then select the op�on

More from server

from the

Presets

list. If the op�on

More from server

is not displayed in the list, it means that

MECHA is not connected to the Internet. In this case, tap the

[Connect to

Wi-Fi]

bu�on at the bo�om of the page, and a�er connec�ng, refresh the

page.

• On

Row

page, select the op�on

More from server

from the

Presets

list.

• Provide a keyword if you want to get only certain presets, and tap the

[OK]

bu�on. The names of the presets found on server are added to the

Presets

list.

• The preset name describes what the preset does, and over �me you will

know which keywords to use. For example, the sequence

_P_

in a preset

name means that the preset includes a pause.

• (

in a presets name means that the preset is not saved yet on MECHA.

• Save the presets you find useful, as we showed in the previous chapter:

◦

Select a preset from the

Presets

list.

◦

Tap on

[Load]

bu�on to load it (if the bu�on is visible).

◦

Modify the preset if necessary.

◦

Save the preset with the same name, or with a different name.

The presets for Dual Axis available to download at the moment are:

• DAC_8_Shots_3_Rows_Z_N_Level.mps

• DAC_10_Shots_3_Rows_Z_N_Level.mps

• DAC_12_Shots_3_Rows_Z_N_Level.mps

We analyze

DAC_10_Shots_3_Rows_Z_N_Level.mps

, no�ng that the

descrip�on is similar for the other two.

Содержание Fanotec MECHA














































































































Результаты поиска

Содержание Fanotec MECHA

Отзывы:

Nodal Ninja Fanotec MECHA, Руководство пользователя, Страница: 76 / 109

Результаты поиска

Содержание Fanotec MECHA

Отзывы: