Noblelift RT16P, Руководство по техническому обслуживанию

Страница: 28 / 50

26
d.
Checking electrical fuses
Remove the plastic cover, the location of fuses is shown in Fig 15 below. Size of the fuses is shown in
Table 4 below.
Fig 15: Location of fuses diagram
9. TROUBLE SHOOTING
If the truck has malfunctions follow the instructions, mentioned in chapter 6.
Table 5: Trouble shooting
TROUBLE CAUSE MAINTENANCE
Load lifting failure
Load weight too high
Lift only the max. capacity,
mentioned on the ID-plate
Battery discharged Charge the battery
Lifting fuse failure
Check and eventually replace the
lifting fuse
Hydraulic oil level too low
Check and eventually refill hydraulic
oil
Oil leakage
Repair the hoses and/or the sealing
of the cylinder
Oil leakage from air
suction
Excessive quantity of oil Reduce oil quantity.
Truck operating
failure
Battery is charging
Charge the battery completely and
then remove the main power plug
form the electrical socket.
Rate
FU 1 10A
FU
2
10A
FU
3
10A
FU
01 500A
Table 4: Size of the fuses