9
When operating the electric pallet truck, the operator has to wear safety shoes.
The truck is intended to be used for indoor applications with ambient temperatures
b5
C and + 40
C.
The operating lighting must be minimum 50 Lux.
To prevent unintended sudden movements when not operating the truck (i.e. from another
person, etc.), press emergency switch (5) or press the button
on display.
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a. Commissioning
Table 2: Commissioning data
Type
SPTE15-C/ PTE15-C
Commissioning weight [kg]
130kg
Dimensions [mm]
1530x540x1250
After receiving our new pallet truck or for re-commissioning you have to do following before (firstly)
operating the truck:
Check if are all parts included and not damaged
Make sure the tiller is assembled correctly (electrical socket is connected and fixed with two plastic
clamps, circlip of the axle is installed)
Check that battery is charged (follow chapter 8)
Do the work according to the daily inspections as well as functional checks.
b. Lifting/ transportation
For transporting, remove the load, lower the forks to the lowest position and fix the truck safe with
dedicated lifting gear according to the following figures.
Lifting
USE DEDICATED CRANE AND LIFTING EQUIPMENT
DO NOT STAND UNDER THE SWAYING LOAD
DO NOT WALK INTO THE HAZARDOUS AREA DURING LIFTING
Park the truck securely and lash the truck according to the points identified in Fig. 5. Lift the truck to its
destination and place the truck securely before removing the lifting gear. The lashing points are
according to the Fig. 5.
