background image

Use and maintenance manual model “UNICA 10 V/C” - WOOD

ENGLISH

16 

and  the  receiver,  or  if  the  batteries  are  flat, 

use the 

emergency  cables 

upplied, to restore 

communication between the remote devices.

EMERGENCY 

CABLE 

CONNECTION

3

Before connecting the emergency cable, 

remove the batteries from the remote control. 

FIRE HAZARD

.

7.2 KEYS

The remote control is as in the image below:

1

2

3

4

5

6

1

Increase key (selection key)

2

Decrease key (selection key)

3

ON/OFF or reset from “Sleep” mode key

4

Display

5

MENU access and confirm key

6

Back to previous screen key

In “Sleep” mode, the screen of the remote control 

turns off, maintaining enabled, if necessary, only 

the remote communication with the appliance to 

reduce battery consumption.

7.3 DISPLAY

The screen of the remote control appears as 

illustrated in the figure below:

STAND-BY SCREEN 

1

2

3

After 20 seconds of inactivity, the remote control 

display blacks out and switches to “SLEEP” mode, 

maintaining the remote connection with the 

appliance. Press 

 to reactivate it.

This Icon indicates the appliance status (see the 

icon list for further information).

It indicates the operating power. Press the scroll 

key 

 to display power settings, and use the two 

scroll keys 

↑↓

 to make changes. 

Any  change  is  automatically  confirmed  within  3 

seconds after editing, or else by pressing 

OK

. An 

acoustic signal will confirm the change has been 

carried out successfully.

It displays the room temperature detected by the 

remote control. Press the scroll key 

 to display the 

temperature settings, and use the two scroll keys 

↑↓

 to make changes.  

Any  change  is  automatically  confirmed  within  3 

seconds after editing, or else by pressing 

OK

. An 

acoustic signal will confirm the change has been 

carried out successfully.

7.4  FLAT BATTERIES

In case of flat batteries, the screen will display a 

symbol indicating their current status. The remote 

control will nonetheless continue to operate.

1

2

3

Содержание UNICA 10 V/C





























Отзывы: