Nobis A11 C ZENITH, Инструкция по установке, эксплуатации и обслуживанию

Страница: 4 / 36

Use and Maintenance Manual model “A11V - C ZENITH & A11 V PLUS ZENITH”
4
ENGLISH
1 INTRODUCTION
The product by Nobis was designed and manufactured
in compliance with the reference standards for the
manufacturing products (EN13240 wood stoves,
EN14785 pellet appliances, EN13229 fireplaces/
inserts for wood, EN12815 wood stoves), with
high quality materials. The products also comply
with the essential requirements of the Directive 2006/95/
EC
(Low Voltage) and the Directive 2004/108/EC
(Electromagnetic Compatibility).
The printing, translation and reproduction,
even partial, of this manual is intended
as binding by the manufacturer's authorisation and
the content of working logic and explanatory
figures is considered not be be disclosed.
Always consult the authorised technicians if in
doubt and/or confused by operation of the
the product.
The manufacturer reserves the right to make changes to
specifications and technical and/or working features of
the product at any time without prior warning.
1.1 SYMBOLS
The following manual contains symbols which high-
light the importance of particular descriptions or con-
cepts;
INFORMATION: Compliance with the specifications
guarantees correct operation of the product.
ATTENTION: Symbol used to identify
particularly important information
DANGER: The presence of this symbol
indicates utmost attention is required, to guarantee
user and product safety.
1.2 PLANNED USE
The product in this manual, is a
fireplace for domestic heating,
feed by automatic loading and exclusively with wood
pellets.
The product was designed and manufactured to work in
safety if the following conditions occur:
• installation by specialist staff
according to the specific reference standards;
• use within the limits declared on the product
data sheet and in this manual;
• compliance with technical procedures described in the
manual;
• carrying out routine maintenance within the times
and methods indicated in this manual;
• prompt execution of extraordinary
maintenance if necessary
(malfunctioning);
• activity and maintenance of safety devices
(do not remove or bypass this devices).
1.3 IMPROPER USE
The product must be intended for the use for which it
was expressly designed; for any other use, the manu-
facturer cannot
be held in any way liable for damage caused to
people, animals or property.
Improper use is intended as:
• use of the product as an incinerator;
• use of the product with fuel other than
wood pellets with a diameter of 6 mm;
• use of the product with liquid fuel;
• use of the product with the fire door open and/or
glass broken and/or ash pan removed and/or
pellet tank open.
Any other use of the appliance other than that
planned must be authorised in advance
in writing by the manufacturer.
Furthermore, the manufacturer cannot be held in
any way liable for errors in installation, adjustment or
maintenance of
the product.
1.4 IMPORTANCE OF THE MANUAL
The manual has the purpose of providing essential
rules for correct installation, use and maintenance of
the product.
PRESERVATION: Keep the manual in a place that is
easy and quick to find;
DETERIORATION OR LOSS: Consult the official site to
download the manual;
PRODUCT TRANSFER: In the event of sale between pri-
vate individuals of the product, the owner is obliged
to
deliver the product with the following manual.
1.5 GENERAL SAFETY WARNINGS
Non-compliance with the provisions of this manual can
cause damage to people, animals and property.
• Installation, testing of the system, functionality
testing and initial calibration of the
product must only be carried out by
qualified and authorised staff.
• The product must be connected to a single chimney
flue that guarantees the draught declared by the
manufacturer and which complies with the installa-
tion
standards outlined in the assembly location of the
product.
• The premises where the product is installed must be
adequately ventilated (air intake).
• Do not touch the hot surfaces without adequate
protective equipment, to avoid burns.
• When in operation, the external surfaces
reach high temperatures.
• It is forbidden to make changes to the product unless
expressly communicated in writing by the
manufacturer.
• In the event of fire in the chimney flue, contact
the Fire Brigade immediately.