noax N11, Руководство пользователя

Страница: 81 / 120

User Manual N11
Software nSMART™
Industrial PC
3085-US-2.4
www.noax.com
Page 81 of 120
11.8 Launching touchscreen cleaning mode
It is important to refer to Chapter 13 on cleaning the Industrial PC at this point.
1. To launch touchscreen cleaning mode, open the nSMART™ software overview.
Select the
Touchscreen
button.
Fig. 74: nSMART overview
2. Press the button for the desired cleaning time (30 s, 1 min, 3 min, or 5 min). The
cleaning mode will then start automatically and the touchscreen of the Industrial PC
will be locked for the time during which cleaning is taking place.
Fig. 75: nSMART: touchscreen overview: Setting the cleaning time
3. The touchscreen can now be cleaned.
The Input LED flashes when cleaning mode is activated.
4. Cleaning mode ends automatically once the set time has passed.
The software switches back to the touchscreen overview.
5. Exit the touchscreen overview by clicking on the
Exit
button.