![Noark MIT26 Скачать руководство пользователя страница 1](http://html.mh-extra.com/html/noark/mit26/mit26_installation-instructions_1697692001.webp)
A
C
D
B
Do not attempt to install or perform maintenance on equipment while it is
energized. Death, severe personal injury, or substantial property
damage can result from contact with energized equipment. Always verify
that no voltage is present before proceeding with this task, and always
follow generally accepted safety procedures.
NOARK is not liable for the misapplication of its products.
Veuillez ne pas tenter de faire d’installation ou de maintien sur
l’équipement quand il est branché. Les contacts avec l’équipement
branché pourra provoquer des morts, des blessures grâves
personnelles ou du dommage à la propriété. Veuillez toujours être sûre
qu’il n’y pas de tension avant d’ exécuter cette mission et respecter les
processus de sécurités acceptés généralement.
NOARK n’est pas responsable des fausses manoeuvres de ses
produits.
Trabajando en o cerca de equipo energizado puede resultar en riesgo
de muerte, daños corporales severas o daños a la propiedad.
Asegúrese que la máquina no esté energizada antes de instalar o
realizar elmantenimiento. Y siempre siga los procedimientos de
seguridad aceptados.
NOARK no es responsable de la mala aplicación de sus productos.
MIT26
UL 489 Mechanical Inter Lock
For use with NOARK Electric Ex9 Series - M
Remove the front cover of the two Circuit Breakers
Install the connecting rod of the two Circuit Breakers
Turn over the front cover and cut out the two groove
portions A and B
A
B
The circuit breaker is in the trip before installation
6X
1X