15.
Install the pump drive belt (21) making sure pulleys are aligned and the
belt runs true.
16.
Replace the fan and fan shroud.
17.
Replace the upper radiator hose, turning the ends opposite from the way
it was originally. This is to give enough clearance between the clutch and
the hose.
18.
Replace the air filter housing and filter into the hose in the front of the
truck then push it down into the rubber donuts in the new location. Untie
the rear housing and clamp it to the front half.
19.
Replace the coolant in the radiator.
20.
Reconnect the battery.
21.
Run the engine and check for alignment and clearance problems.
3.13 Deweze, Ford 5.4L, 2008+ Clutch Pump Installation
This installation procedure is included in Chapter 5, DewEze 2008+ Pump Clutch Kit
Installation, Part No. 308703
SEPTEMBER 30, 2008
CHAPTER 2 MAINTENANCE
PAGE 22
3 REMOVAL AND INSTALLATION
Truck Mounted Passenger Stair TMPS-200
Manual No. 307559
