Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitybrands.com/nLight
© 2014-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/28/21
nCM ADCX (PC) RJB - TN-140-001
1 of 4
OVERVIEW
The nCM ADCX RJB and nCM PC RJB photocell sensors are ceiling/surface mount devices
that provide a range of daylight harvesting features for nLight Control System installations with
finished ceilings (e.g. ceiling tiles, sheetrock, plaster). The nCM PC RJB version provides on/off
photocell control by default, while the nCM ADCX RJB provides automatic dimming photocell
control by default. Ideal for spaces with windows, such as vestibules, corridors, classrooms, or
offices, these sensors work by first monitoring daylight conditions in a room. They then signal
networked nLight control devices to adjust their dimming outputs (and/or turn lighting off) to
obtain maximum energy savings while ensuring adequate lighting levels are maintained.
The nCM ADCX RJB sensor controls nLight enabled luminaires (e.g. VTLED Family from Lithonia),
nLight dimming relay packs (e.g. nPP16 D or nSP5 PCD), or auxiliary dimming output devices
(e.g. nIO D). The nCM PC RJB switches nLight enabled luminaires or any relay/dimming device
in an nLight system (e.g. nPP16). Both sensors can also be used together with nLight occupancy
sensors. Manual override or adjustment of the dimming level is possible via WallPod dimmers or
through the SensorView software.
Both versions are powered via the nLight network bus and can communicate with one or more
nLight enabled luminaires or nLight relay/dimming packs to enable control of fixtures
individually or in groups. These configurations work standalone and do not require a connection
to a larger nLight network.
FEATURES
•
Automatic Dimming Photocell Control (nCM ADCX RJB model only)
•
Full On/Off Photocell Switching Control (disabled by default on nCM ADCX RJB)
•
Optional Inhibit mode: Photocell can prevent lights from turning on if adequate daylight is
available, but does turn lights off (nCM PC RJB model only)
•
LED status indicator
•
Adjustable settings (e.g. set-point) via push-button or SensorView software application
•
Broadcasts photocell information over a local nLight channel
•
Remotely upgradeable firmware
Catalog Number:
Date:
Project:
nCM Example: nCM ADCX RJB
Series
Dual Zone
Temp / Humidity
Additional Features (choose 1)
Buy America(n)
1
nCM ADCX
Automatic Dimming
Control Photocell
nCM PC
On/Off Control Photocell
[blank] Single Zone Control
DZ
Dual Zone Control
[blank] Standard
LT
Low Temp/ High
Humidity
RJB Rear RJ45 (CAT5e patch
cable & RJ45 splitter
included)
[blank] Standard
BAA
Buy America(n) Act
Compliant
ORDERING INFORMATION
Capable
This item is an A+ capable component, which has been designed and tested to provide out-of-the-box
luminaire compatibility with simple commissioning, when included as part of an A+ Certified™ Solution.
To learn more about A+, visit
Buy American
BAA variants of this product are assembled in the USA and meet the Buy America(n) government
procurement requirements under FAR, DFARS and DOT. Please refer to
www.acuitybrands.com/buy-american
for additional information.
Warranty
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note:
Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
nCM ADCX RJB
nCM PC RJB
Daylight Harvesting
Photocell
Notes:
1. Not available with LT
Buy American
