NKT Photonics Koheras ADJUSTIK, Руководство по эксплуатации продукта

Страница: 50 / 105

Overview
50
Watchdog timer
Set the watchdog timer to disable the laser automatically if it loses
communications with CONTROL executing on a PC. The timeout for the timer can
be set between 1 and 255 seconds. Set it to OFF (with the selection dial) to turn
of the function.
Figure 29 Watchdog timer setting
Display backlight
Use the Display backlight menu to adjust the back light intensity of the LCD
display panel. Enter the menu and turn the selection dial left or right to vary the
intensity.
Figure 30 Setting the intensity level of the LCD panel back light
IP Address
The rear panel of the laser supports a standard 10/100 baseT Ethernet port. Use
this menu to set the IP address of the laser.
Figure 31 IP address setting
Emission button
Press the Emission button to turn laser emission ON and OFF. The Emission LED
on the front panel will be ON RED when the laser emission is enabled.
Warning: You must follow all safety regulations required for the location where
the laser will be operated.
Warning: Turning on the laser will emit hazardous laser Class 4 radiation. Ensure
to observe and implement all safety regulations, warnings and cautions in this
guide and the Koheras ADJUSTIK Safety, Handling and Regulatory Information
document before continuing.