NKT Photonics Koheras ADJUSTIK HP, Руководство по эксплуатации продукта

Страница: 82 / 115

Serial monitor
82
Serial monitor
You can view the real time RS-232 serial communication messaging to and from
the laser using the Serial monitor panel. The panel can be used for:
•
Debugging communication with the laser.
•
Issuing CLI commands to the laser using the command input field.
Figure 52 Serial monitor
The panel is enabled by placing a check mark on the Window pull down menu
next to the Serial Monitor item.
To close the panel, click on the upper right corner “X”.
Application log
In addition to the Serial Monitor, the Application Log panel is useful for
debugging serial communications. The panel displays time stamps for COM port
open, close times, and also general status information. You can clear, save, and
print the log data using the buttons in the upper left corner.
Figure 53 Serial Monitor
The panel is enabled by placing a check mark on the Window pull down menu
next to the Application Log item.
To close the panel, click on the upper right corner “X”.
Live Serial Communication
Messaging
Command Input
Clear the log
Save the log to file
Print the log