Hub’O: Getting started
All Rights Reserved – nke Watteco®
Hub’O: Description of the exchanges with the Server
Page
12
of
14
4
C
ONNECTION TO THE NETWORK
Once Hub’O correctly configured, it can be connected physically to the Ethernet or 2G/3G network.
Thus, you can connect an Ethernet cable to the gateway or you can insert the SIM card on the
available slot, if it is not already done.
Check that the Ethernet/3G switch is at the right position for what you need. This switch can be seen
on the Figure 3, at the right of the LCD screen and under the user button.
Afterwards, Hub’O is correctly configured and can start its exchanges with the distant server.
5
E
XCHANGES WITH THE DISTANT SERVER
In order to have a complete understanding on how Hub’O exchanges with the distant server and
what these exchanges are for, please read the document named:
“
Hub'O_Server_Exchanges_Description_X_X.pdf”
Содержание Hub'O
Страница 1: ...HUB O GETTING STARTED ...
