NKE Hub'O, Начало работы

Страница: 10 / 14

Hub’O: Getting started
All Rights Reserved – nke Watteco® Hub’O: Description of the exchanges with the Server
Page 10 of 14
3.2 C
ONFIGURTION THROUGH
USB
STICK FILE TRANSFER
3.2.1 C
ONFIGURATION FILE CREATION
Hub’O configuration file is a .json file, interpreted by the gateway to set its differents parameters.
In this configuration file, the gateway can be configured to use DHCP or a fixed IP address, the 2G/3G
parameters can be set if needed, the SNTP server address can be set, and, of course, all the
parameters used by the application: the distant server address, the data directory to upload file, the
configuration directory to get the files, the data upload period, etc.
In order to have an exhaustive description of this file and how to complete it, please see the
document named
“Hub'O_Server_Exchanges_Description_X_X.pdf” , on paragraph §5.2 Hub’O
Configuration file .
Once your configuration file created, you can rename it as follow: c_010_0000.json .
3.2.2 S
IGNATURE FILE CREATION
For security reasons, to upload a new configuration file on Hub’O gateway, it is necessary to generate
a signature file first. Indeed, Hub’O will check for this signature file before taking into account the
configuration file.
To generate this signature, please use the “ make-manifest ” tools in command line. This tool is
available in the repertory “ exe_win32 ” inside the make-cfg zip file.
The command line to use is the following:
If everything went well, a new file named “c_010.manifest” should appear in the same directory as
make-manifest.exe and c_010_0000.json.
FIGURE 5 - CREATING THE SIGNATURE FILE