Njoy Balder 10000, Руководство пользователя

Страница: 9 / 43

16 17
Engli
sh
Română
6.2. LCD panel indicators
Display Function
Remaining backup time information
8 8
Indicates battery discharge time in numbers.
H: hours, M: minutes, S: seconds
Warning & Fault information
Indicates that the specified warning and fault occurs.
8 8
Indicates the fault codes, and the codes are listed in
details in section 3-9.
Mute operation
Indicates that the UPS alarm is disabled.
Input/Output & Battery information
OUTPUT
Vac
Hdc
Hz
Indicates the output voltage, frequency or battery
voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Load information
Indicates the load level by 0-25%, 26-50%, 51-75%, and
76-100%.
OVER LOAD
Indicates overload.
SHORT
Indicates the load or the output is short.
Mode operation information
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
ECO
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Battery information
Indicates the Battery capacity by 0-25%, 26-50%, 51-
75%, and 76-100%.
BATT. FAULT
Indicates the battery is not connected.
LOW BATT.
Indicates low battery level and low battery voltage.
Input & Battery voltage information
INPUT 12
Vac
Hdc
Hz
Indicates the input voltage or frequency or battery
voltage.
Vac: Input voltage, Vdc: battery voltage, Hz: input
frequency
6.3. Audible alarm indicators
UPS status Alarm
Bypass mode Beeping once every 2 minutes
Battery Mode Beeping once every 4 minutes
Fault mode Beeping continuously
Warning Alarm
Overload Beeping twice every second
Others Beeping once every second
Fault Alarm
All Beeping continuously