Nixie Dream VFD Tube Clock V1.00 Operation Manual
For example, you would like the clock to decrease it brightness when the light level in the room is
below 60, then set this parameter to 60. When the level will go below 60, the clock will decrease its
brightness.
Press the SET button repeatedly until the desired threshold level for switching for the evening is
shown. The current light level in the room is shown in the middle tubes (6.2) for your convenience.
TIP:
It is better to set this up at a light level when you want the clock to decrease its brightness.
Press the MODE button to move to set the brightness level setting.
MENU PAGE 9
BRIGHTNESS Control Night brightness
9.3
Press the SET button repeatedly until the desired tubes brightness level for the night is shown. The
brightness is set in the range from 04 to 32. Where 32 is the maximum brightness, 04
–
is the
minimum brightness.
Press the MODE button to move to the next option.
MENU PAGE 10
Auto-Dimming Option On/Off
10.1
Press the SET button repeatedly until the desired mode of the Auto-Dimming option is shown.
0: Auto-Dimming is ON
1: Auto-Dimming is OFF
MENU PAGE 11
Default tubes brightness
(or normal brightness)
This setting allows you to adjust the normal brightness of the tubes.
11.3
Press the SET button repeatedly until the desired default level of the
tube’s
brightness is shown.
The default brightness is set in the range of 04-32. Where 32 is the maximum brightness, 04
–
is the
minimum brightness.
TIP:
We recommend keeping the default brightness at level in a range of 08-12.