FL4 Quick Start Guide
Revision A0
Thanks for your NIX
labs purchase! For the full user’s guide, visit
This product is not a toy and should be handled with care. Do no insert objects
into the gaps in the enclosure. Do not press on the LED filaments as they are
not flexible. Consult the full manual for complete usage instructions.
Getting Started
Check the box for the following items and remove them from their packaging:
•
FL4 filament clock
•
Australian power adaptor (or Multi-Region adaptor for international orders)
For use in countries other than Australia, remove the AU plug from the power adaptor,
and replace with the correct one for your region (US, EU or UK).
Plug the power adaptor’s USB
-C end into the socket on the back of your clock either way
around. Connect the power adaptor to the wall outlet and turn on - your clock will show
88:88 for a few seconds after which it is ready to use.
When powering from a computer, connect directly to the computer’s USB port –
avoid
USB hubs or extension cables. You can use any good-quality charge & data USB-C to
regular USB-A or USB-C to USB-C cable to connect your clock to your computer or
phone/tablet.
