Nivus OCM PRO CF, Инструкция по эксплуатации

Страница: 18 / 194

Instruction manual
OCM Pro CF
page 18 OCM Pro CF - Rev. 09 as of 07.06.2016
®
5 Storing, Delivery and Transport
5.1 Receipt
Check your delivery according to the delivery note for completeness and intact-
ness immediately after receipt. Report any damage in transit to the carrier im-
mediately. Send a written report to NIVUS GmbH Eppingen as well.
Report any delivery incompleteness in writing to your representative or directly
to NIVUS Eppingen within two weeks
Mistakes cannot be rectified later!
5.2 Delivery
The standard delivery of the OCM Pro CF measurement system contains:
-
the instruction manual with the certificate of conformity. Here, all necessary
steps to correctly install and to operate the transmitter are listed.
-
one OCM Pro CF transmitter, type S4, M4 or R4
-
one pc. of evaluation software type NivuSoft 2.0 for Windows
®
Vista, 7 or 8
Check any additional accessories by using the delivery note.
5.3 Storing
Maintain the storage conditions:
max. Temperature: + 70°C
min. Temperature: - 30°C
max. humidity: 80 %, non-condensing
During the storage always protect the device from corrosive or organic solvent
vapours, radioactive radiation and strong electromagnetic radiation.
5.4 Transport
Protect the measurement system from shock and impact loads and vibrations.
The transportation must be carried out in the original packaging.
5.5 Return
The units must be returned at customer cost to NIVUS Eppingen in the original
packaging free of charge.
Returns with insufficient postage will not be accepted!