Nivus OCM F, Инструкция по эксплуатации

Страница: 44 / 110

Instruction Manual
OCM F
page 44 OCM F - rev. 05 / 06.04.2018
1
Error number
2
Number of stored messages
3
Date of error message
4
Time of error message
5
Type of error / error message
Fig. 21-3 Error message
Information on error memory
Remaining errors are not going to be re-written into the error memory if once deleted. As
soon as the error occurs repeatedly (or if the power supply has been interrupted for a short
period) the same error will be saved into the error memory again.
22 Display Menu (EXTRA)
This menu allows modifying settings such as units, language, system time as well as the dis-
play itself. The following submenus are available:
Fig. 22-1 EXTRA Submenus
Due to reasons of limited space it is not possible to indicate the entire menu on the display.
This can be seen from the black scroll bar on the right-hand side of the display.
Scroll through the menu using the >up< and >down< keys.
>Info<
This point provides comprehensive information on unit type, transmit-
ter serial no. and software version (see Fig. 22-2). The menu is sub-
divided into four single pages. Pressing the key >right< and >left< will
take you through the pages. Among other information these pages
contain information on last parameter setting/parameter change as
well as mains power failure which might have been occurred.