Product specification
page 21
rev. 00 / 12.04.2017
9.2
Connectable sensors
The image below provides an overview on the connectable sensors.
1
1
2
3
Radar sensor OFR
2
Ultrasonic level sensor, Type OCL-L1 (option)
3
i-Series sensor NMI0
Fig. 9-3
Overview of connectable sensors
9.3
Device identification
The instructions contained within this manual are valid only for the type of device specified on
the title page.
The name plate is fixed on the side of the enclosure and contains the following:
• Name and address of the manufacturer
• CE label
• Information on type and series, serial no. if available
• Power supply
In case of enquiries and ordering replacement parts it is important to specify article number
as well as the serial number of the respective transmitter or sensor. This ensures correct and
quick processing.
Note
Check the delivered instrument for accordance with your order by identifying the name-
plate.
Check the nameplate for correct specification of the power supply.
F
c
The declaration of conformity is located at the end of the manual.