Nivus NivuFlow 650, Инструкция по эксплуатации

Страница: 60 / 173

Instruction Manual
NivuFlow 650
page 60 NF 650 - rev. 01 / 29.06.2020
The transmitter in the background operates with the settings which have been entered at the
beginning of the parameter setting.
The following request is prompted on the display not before the current parameter setting has
been finished and confirmed.
Fig. 26-2 Confirmation after parameter setting
 Ü
Confirm the entry with >YES<.
The password query for the parameter settings appears:
Fig. 26-3 Password query for parameter settings
 Ü
Enter the password (default setting “2718”).
After accepting the new parameters the NivuFlow continues to operate using these data.
26.3 Use/Entry using the letter block
Certain parameters can be labelled with names or designations. A virtual keypad is indicated in
the bottom section of the display if such a parameter has been selected.
1 Selected character
2 Dual function character (highlighted blue)
3 Shift (upper/lower case)
4 Space
5 Back or delete button
Fig. 26-4 Keypad
Note
The use of the key pad is explained here once. Later in the manual you will be prompted to
enter designations or names following this explanation.