manualshive.com logo in svg

Nivus NivuFlow 650, Инструкция по эксплуатации, Страница: 52 / 173

Поделиться
Скачать
Nivus NivuFlow 650 Скачать руководство пользователя страница 52

Instruction Manual

NivuFlow 650

page 52

NF 650 - rev. 01 / 29.06.2020

24.1  Overvoltage Protection for Power Supply

NIVUS recommends type EnerPro 220Tr surge arrestors (for a 100-240 V AC power system) 

and EnerPro 24Tr (for 24 V DC power supply) for the mains supply.

Observe the connection direction

Observe the non-reversed connection (p-side to transmitter) as well as a correct, straight 
wiring supply. Ground (earth) must lead to the unprotected side.
The overvoltage protection devices are ineffective if wired incorrectly.

1) Low impulse earthing resistance required

Fig. 24-1 

Overvoltage protection for power supply AC

1) Low impulse earthing resistance required

Do not reverse protected (p) and unprotected sides of overvoltage protection 

Fig. 24-2 

Overvoltage protection for power supply DC

Содержание NivuFlow 650














































































































































































Отзывы:

Нет отзывов