manualshive.com logo in svg

Nivus NivuFlow 650, Инструкция по эксплуатации, Страница: 123 / 173

Поделиться
Скачать
Nivus NivuFlow 650 Скачать руководство пользователя страница 123

Setting Parameters

page 123

NF 650 - rev. 01 / 29.06.2020

34.5.3  Feature unlock 

Use this function to unlock (optionally available) features provided that they have been ordered 

from NIVUS.

Â

Ü

Feature unlocking procedure:

1.  Click button >Feature Unlock<. 
2.  In the menu opening up click >Feature Unlock< button.
3.  Enter function code and confirm with "Input". 

The transmitter confirms the feature unlock indicating "Successful". The assigned 

licence is shown in the display.

4.  The unit requires a restart. Subsequently, the new features are available in the 

according menus and now can be adjusted and used.

Fig. 34-10  Feature unlock

34.5.4  Reboot

A transmitter reboot will interrupt the current measurement process.
The system will reboot using the parameters set and saved last. After booting, the system 

behaves as when the instrument is switched on (like a PC). 
This menu point replaces the system shutdown and reboot.
All parameters, counters and saved data are retained.

Fig. 34-11  Reboot 

34.5.5  Restart Measurement

This option interrupts the currently running measurement process and starts a new measure-

ment.

Содержание NivuFlow 650














































































































































































Отзывы:

Нет отзывов