Nivus NFP, Инструкция по эксплуатации

Страница: 15 / 87

Product specification
NFP - rev. 04 / 23.05.2018 page 15
Product specification
13 Overview
1
Clear view door
2
Graphic Display
3
Keypad
4
Preparation for Cable Glands
5
Terminal Clamp Housing
6
USB-A-Interface
Fig. 13-1 Overview
14 Device identification
The instructions contained within this manual are valid only for the type of device specified on
the title page. The name plate is fixed on top of the enclosure and contains the following:
•
Name and address of the manufacturer
•
CE label
•
Information on type and series, serial no. if available
•
Year of manufacture: the first four digits of the serial number represent the year and the
week number of manufacture (1821NFP….)
•
Additional Ex identification for Ex-version devices (as mentioned in chapter “5 Use in
accordance with the requirements”)
In case of enquiries and ordering replacement parts it is important to specify article number
as well as the serial number of the respective transmitter or sensor. This ensures correct and
quick processing.
Check the nameplate
Check the delivered instrument for accordance with your order by identifying the name-
plate.