Nivetec Echo Smart Series страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 73

background image

- Page 1

-

1. Product Description

EchoSmart



is an exciting new development in liquid/solid interface level analyzers.

Instruments  employ  digital  sensors  in  an  architecture  that  locates  microprocessor  signal
control,  enhancement  and  interpretation  in  the  ultrasonic  sensor  rather  than  in  a  remote
analyzer. The sensor is a Smart device. When connected to a power source and instrument
programmer (typically EchoSmart Controller or EchoSmart Power Supply Unit), it produces
the Level or Range measurement and an indication of the dispersed solids Level above the
primary  interface.  Optional  sensors  are  available  that  additionally  provide  surface  back
scatter turbidity measurements.

This equipment design opens the door for a wide range of flexible installation configuration
options. The Controller is the operator graphical user interface device and power source to a
sensor. It is also a communication hub for analog and digital communication outputs to the
customer  data  acquisition  system.  EchoSmart  can  be  implemented  as  a  stand-alone
instrument  (Cont Smart  Sensor) or with  numerous  sensors  networked together  and
operated by a single Controller as discussed below.

1.1.

Stand-Alone Instrument Option

When connected to an EchoSmart Controller, the instrument has all the functionality
of a complete measurement system. The Controller provides power to the sensor and
is the user interface for instrument programming and communication with the sensor.
Customer terminations for digital and analog communications to the customer’s data
acquisition and control system are provided inside the Controller.

A large graphical LCD with control keypad provides a simple and intuitive platform to
implement Sensor Parameters, configure communications, view current and historical
measurements, and perform system diagnostics. HELP PROMPTS are automatically
displayed for each parameter and system function.

1.2.

Field Network Option

Up  to  16  EchoSmart  Sensors  can  be  operated  by  a  single  Controller  in  a  wired  or
wireless  Field  Network.    In  either  arrangement,  the  network  is  fully  integrated  and
requires no software integration by the customer.

The Controller handles all programming and monitoring functions for all sensors in the
network. Power Supply Units provide power to associated sensors and are fitted with
integrated two-way transmitter modules when used in an RF network. Terminations for
analog communication (4-20mA signal) are also at the Power Supply Unit.

1.3.

Network Integrated to Customer Data Acquisition and Controls

EchoSmart Field Networks can be integrated to the customer’s data acquisition and
control system via two-wire RS-485, Modbus RTU protocol. See Section 8.4 for
additional information.

«
...
8
9
10
11
12
...
»

Содержание Echo Smart Series










































































Отзывы:

Нет отзывов

Похожие инструкции для Echo Smart Series

Бренд: Aaeon Страницы: 76

Бренд: Aastra Страницы: 30

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: National Instruments Страницы: 29

Бренд: olympia electronics Страницы: 10

Бренд: YOKOGAWA Страницы: 150

Бренд: YOODA Страницы: 3

Бренд: YMGI Страницы: 8

Бренд: Samson Страницы: 56

Бренд: EasyIO Страницы: 17

Бренд: Bentel Security Страницы: 4

Бренд: Whale Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды