Niveo NGSME48T4H Скачать руководство пользователя страница 301

Страница: 301 / 338

Chapter

3: Web Management

VLANs - VLAN Membership

PoE Switch User Manual | 301

3.2.14. Monitor - VLANs

3.2.14.1. VLANs - VLAN Membership

This page provides an overview of membership status of VLAN users.

VLAN User

Various internal software modules may use VLAN services to configure VLAN memberships

on the fly.

The drop-down list on the right allows for selecting between showing VLAN memberships as

configured by an administrator (Admin) or as configured by one of these internal software

modules.

The "Combined" entry will show a combination of the administrator and internal software

modules configuration, and basically reflects what is actually configured in hardware.

VLAN ID

VLAN ID for which the Port members are displayed.

Port Members

A row of check boxes for each port is displayed for each VLAN ID.



If a port is included in a VLAN, the following image will be displayed:



If a port is in the forbidden port list, the following image will be displayed:



If a port is in the forbidden port list and at the same time attempted included in the

VLAN, the following image will be displayed

. The port will not be a member of the

VLAN in this case.

Navigating the VLAN Membership Status page

Each page shows up to 99 entries from the VLAN table (default being 20), selected through

the "entries per page" input field. When first visited, the web page will show the first 20 entries

from the beginning of the VLAN Table. The first displayed will be the one with the lowest

VLAN ID found in the VLAN Table.

The "VLAN" input field allows the user to select the starting point in the VLAN Table.

Clicking the

“Refresh” button will update the displayed table starting from that or the closest

next VLAN Table match.

The

“>>” button will use the last entry of the currently displayed VLAN entry as a basis for the

Содержание NGSME48T4H



















































































































































































































































































































































Результаты поиска

Содержание NGSME48T4H

Отзывы:

Похожие инструкции для NGSME48T4H

Бренды по названию

Популярные бренды

Niveo NGSME48T4H, Руководство пользователя

Результаты поиска

Содержание NGSME48T4H

Отзывы:

Похожие инструкции для NGSME48T4H

Бренды по названию

Популярные бренды