Chapter
3: Web Management
Voice VLAN - Configuration
PoE Switch User Manual | 173
3.1.18. Configuration - Voice VLAN
3.1.18.1. Voice VLAN - Configuration
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch
can classify and schedule network traffic. It is recommended that there be two VLANs on a
port - one for voice, one for data. Before connecting the IP device to the switch, the IP phone
should configure the voice VLAN ID correctly. It should be configured through its own GUI.
Mode
Indicates the Voice VLAN mode operation. We must disable MSTP feature before we enable
Voice VLAN. It can avoid the conflict of ingress filtering. Possible modes are:
Enabled:
Enable Voice VLAN mode operation.
Disabled:
Disable Voice VLAN mode operation.
VLAN ID
Indicates the Voice VLAN ID. It should be a unique VLAN ID in the system and cannot equal
each port PVID. It is a conflict in configuration if the value equals management VID, MVR VID,
PVID etc. The allowed range is 1 to 4095.
Aging Time
Indicates the Voice VLAN secure learning aging time. The allowed range is 10 to 10000000
seconds. It is used when security mode or auto detect mode is enabled. In other cases, it will
be based on hardware aging time. The actual aging time will be situated between the
[age_time; 2 * age_time] interval.
Traffic Class
Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will apply this class.