Ferrite installation
120mm
120mm
2a Place the LCD screen & illuminator module cable into
the ferrite approximately 120mm from the end of the
right-angle plug.
2b With the cable in place carefully close the ferrite over
the cable so that the ferrite snaps together.
This device complies with part 15 of the FCC rules.
2a
2b
4
Optic coatings
WIFI iOS and Android set up
NITEPLAYER
Set up NitePlayer - iOS
- Enter the App store on your Apple device and search for the
‘NitePlayer’ app. Select the NitePlayer App to download it
- Enter the settings on your Apple device. Select WIFI and
choose the NiteSite WIFI option. (password: 12345678)
It may take a few seconds to connect
Set up NitePlayer - Android
- Select Google play on your Android device. Search for
‘NitePlayer’ and install NitePlayer.
- Enter settings on your Android device, select WIFI and choose
the NiteSite WIFI option. (Password: 12345678)
The optional WIFI capability on the RTEK camera
module allows you to live stream video of your
hunt to an iOS or Android device
Note: When changing password, this is only
entered once. Any error made in setting may
need the unit to be factory reset.
The NiteSite system functions in darkness with the use of infra-red light emitted from the illuminator
module. In darkness the NiteSite system relies on the camera module receiving as much infra-red light
as possible.
Some spotting scope manufacturers have a coating that may reduce infra-red light passing through the
spotting scope optic. This coating improves the image visibility at low ambient light levels. The NiteSite
system is not as effective with spotting scope lenses that have such coatings. Always check the spotting
scope manufacturers instruction details prior to fitting the NiteSite system to ensure you get the best
results from the product.
