TM06S
Features
• Compact and lightweight 4000 Lumens flashlight
• Utilizes four CREE XM-L2 U3 LEDs
• Uses four 18650 batteries for maximum runtime up to 560 hours
• Features advanced temperature regulation (ATR) technology
• Innovative two-stage side switch accesses various modes and
functions (Chinese Patent: ZL201120062948.1)
• Integrated power indicator in side switch indicates remaining battery
power (Chinese Patent: ZL201220057767.4)
• Power indicator displays battery voltage accurate to 0.1V
• Intelligent memory function for brightness levels
• Direct access to ultralow and turbo outputs
• Toughened ultra-clear mineral glass with anti-reflective coating
• Integrated “Precision Digital Optics Technology” provides extreme
reflector performance
• Stainless steel bezel ring protects core components from damage
• Constructed from aerospace grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX-8 (submersible to 2 meters)
• Tail stand capability
Dimensions
Length: 4.74” (117mm)
Head diameter: 1.97” (50mm)
Tube diameter: 1.97” (50mm)
Weight: 9.39oz (266g) (without batteries)
Battery Options
NOTE:
After loading batteries, the power indicator light will blink to
indicate battery voltage. Please refer to “Power Tips” section of this
manual for details
WARNING:
1. Do not mix batteries of different types/brands.
2. When the TM06S is stored in a backpack or left unused for extended
periods, Nitecore recommends the tailcap is loosened to cut off the power
entirely, thus preventing accidental activation of the flashlight.
On/Off Operation
To turn on: press the side switch all the way down until a “click” is heard;
To turn off: press the side switch all the way down again until a “click” is
heard to turn the light off and enter standby mode.
Standby mode: In standby mode, press the side switch partway down to
activate the power indicator to flash once every three seconds, thus
helping users locate the flashlight in dark conditions. To turn off the power
indicator, press the side switch half way down again.
In standby mode, the TM06S operates for up to 40 days with the power
indicator on and up to 138 days with the power indicator off.
Brightness Levels
With the light turned on, press the side switch partway down repeatedly
to cycle through lower, low, medium, high and turbo brightness
levels.TM06S has memory effect for brightness levels. When the
flashlight is turned on, it will resume on the brightness level last used.
Direct Accesses to Lower/Turbo
In standby mode, press and hold side switch partway down to enter lower
mode (3 lumens).
In standby mode, press and hold the side switch all the way down to
enter turbo mode (4000 lumens)
Special Modes (Strobe/Location Beacon/SOS)
With the light turned on, press and hold the side switch all the way down
for more than one second to enter Strobe mode. To cycle through SOS,
Location Beacon and Strobe modes, press the side switch partway down
for more than one second. To exit special mode and resume the previously
used output, press the side switch all the way down to turn the TM06S off.
Power Tips
1. With the light turned on, the blue LED built into the switch will flash
once every two seconds when battery power levels are below 50%. The
blue LED will flash rapidly when battery power is close to depletion.
2. Each time batteries are inserted, the power indicator light will blink in
varying patterns to indicate battery voltage (accurate to ±0.1V). For
example, when battery voltage is at 4.2V, the power indicator will blink 4
times in quick succession, followed by a one second pause, and then two
more blinks. Different voltages represent the corresponding remaining
battery power levels:
NOTE:
When a detected battery is not of the 18650 type, the power
indicator light will blink rapidly to notify the user.
ATR Technology
Advanced temperature regulation (ATR) technology allows the TM06S to
dynamically adjust output performance according to its body temperature.
This prevents damage from overheating and prolongs its working life.
Changing/Charging Batteries
Batteries should be replaced when any of the following occurs: The power
indicator blinks rapidly, output appears to be dim or the flashlight becomes
unresponsive.
NOTICE:
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 4 x 3.7V 3400mAh
18650 batteries under laboratory conditions. The data may vary slightly
during real-world use due to battery type, individual usage habits and
environmental factors.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective /
malfunctioning NITECORE® product can be repaired free of charge for a
period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor
and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact alocal NITECORE® distributor or send an email to
[email protected]
※
All images, text and statements specified herein this user manual are
for reference purpose only. Should any discrepancy occurs between this
manual and information specified on www.nitecore.com, information on
our official website shall prevail. Sysmax Industry Co., Ltd. reserves the
rights to interpret and amend the content of this document at any time
without prior notice.
Operating Instructions
Battery Installation
1. Insert batteries with the positive (+) and negative (-) ends
corresponding to the diagram on the inside of the battery compartment.
2. Tighten the tailcap by aligning the two metal pins on the tailcap with the
corresponding holes on the flashlight body, and rotate clockwise.
*Warning:
Do not use the TM06S with RCR123 or CR123 batteries.
Otherwise the flashlight may be damaged.
Output & Runtime
Accessories
Quality holster, lanyard,
spare O-ring
TURBO
HIGH
MID
LOW
LOWER
LUMENS
4000
LUMENS
1500
LUMENS
480
LUMENS
160
LUMENS
3
1
h
11
h
15
mi
n
32h
560h
4
h
359m
(Beam Distance)
32,300cd
(Peak Beam Intensity)
1.5m
(Impact Resistant)
IPX-8, 2m
(Waterproof AND Submersible)
Thanks for purchasing NITECORE!
User Manual
®
The All-Round Flashlight Expert
TYPE
Nominal voltage
Compatible
Primary Lithium battery
CR123
3V
NO
18650 Rechargeable Li-ion battery
18650
3.7V
Yes
(Recommended)
Rechargeable Li-ion battery
RCR123
3.7V
NO