background image

4

Version date: March 26

th

 2018

14

Operator Manual

NA 9420

4.2 Operating panel

Attention! When the machine is equiped with the optional 
release button the buttons on the operating panel only react 
when the release button behind the drip tray is pressed 
simultaneously.

OFF

Press to switch off the machine; only the lights remain lit.

First press 'OFF' before changing the mode.

PASTEURISING

Sets the machine to pasteurising mode. The ice cream mix in the cylinder and 

mix tank are heated and cooled back.

STANDBY

Sets the machine to standby mode. The cylinder and mix tank are cooled to 

approx. 5ºC.

RUN

Sets the machine to operating mode. Ice cream can be dispensed.

WASH

Sets the machine to wash mode and switches on the mixing apparatus in the 

cylinder. 

REFRESH (press STANDBY and RUN simultaneously)

Sets the machine to refresh mode. The ice cream mix in the cylinder is 

defrosted and frozen again.

The machine can only be set in refresh mode while in run mode.

CHECK AIRFLOW

Control light airflow cooling, lights up RED during when the machine gets too 

hot.

Check whether a free air flow to the bottomside of the machine 
is possible and the air vent openings at the top side of the 
machine aren’t blocked.

- and +

Selection keys to reduce and increase viscosity.

Содержание NA9420AEG













































Отзывы: