4.7 How to set paper roll
• Confirm power is turned ON.
• Open paper separator (upper cover).
• Check print surface and wound direction of paper roll and drop in to the paper roll holder.
• Pull paper for approx. 20cm and insert paper edge into the paper insertion slit.
• Paper sensor detects the paper and paper will be loaded automatically.
(Insert paper until loading movement starts.)
• It loads at constant length and becomes printable after cutting off extra paper.
Paper Roll
Paper Separator
Print Surface
Paper Insertion Slit
[CAUTION]
– Remove axis core of the old paper roll before drop in new paper roll.
– Set paper roll with no play. (May cause paper jam.)
– Leading edge of paper must be straight and right angle. (Refer “Paper Edge Shape Drawing”)
– In the incident of inserted paper on the bias, open the head cover and straighten the paper.
– Since thermal head right after printing will be highly heated, please beware not to touch with
your finger or hands etc.
– Please beware not to clamp your finger or hands etc.
Paper Edge Shape Drawing
D-F10072 NP-K3053/K2053 Product Specifications Rev.1.00
27
