D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.)
27
4.3
Buffer Full Print
Printer activates print line feed automatically based on the command[Smallest Line Feed
Setting] « ESC 3 n » once receiving the data for one line
※１
*1
The volume of buffer full data(Maximum printing line) varies depending on each size of
ANK, Kanji(Refer to 2.1.2 Print specification).
4.4
Drive Selection
Able to select optimization, fixed division (no division / dual division) by command.
When selecting, please select after adding the consumption current by the print rate. (Refer
to [2.6.3
consumption current
])
1) Select Partition Drive
Refer to command table.
*Printing speed will be decreased when except no partition is selected. In addition, blank line
(Max. 1 dot line) may be seen depending on the printing contents (like the patterns which
change printing ratio.)
2) Optimization
Select no division or dual partitioning according to the number of total dot of print per line.
No partition
2 partition
2 inch model
Less than 248 dots
More than 249 dots
3 inch model
Less than 352 dots
More than 353 dots
*When selecting optimization, printing speed changes depending on printing ratio, and printing
noise occurred somewhat.
*When Select optimization, Blank line (Max. 1 dot line) may be seen, and printing quality
is descended somewhat.
4.5
Select Full size and Half size character
Character
How to switch
Japanese
Command [FS &], [FS .] or Switching Shift JIS code
Korean
Command [FS &], [FS .] switching
Code switch (refer to following )
1 byte code (Half size)
*NOTE1
2 byte code (Full size)
4 byte code
(Full size)
1
st
byte
00 h
～
80 h
81 h
～
FE h
81 h
～
FE h
Chinese
40 h
～
7E h
2
nd
byte
80 h
～
FE h
30 h
～
39 h
3
rd
byte
81 h
～
FE h
4
th
byte
30 h
～
39 h
Greek
No switch (Only full size)
Polish
No switch (Only half size)
Russian
No switch (Only half size)
Scandinavian No switch (Only half size)
Turkish
No switch (Only half size)
*NOTE1
: 00h ~ 1F h can not be printed because those are control codes.
