Nippon Gases 2719135, Руководство по эксплуатации и технике безопасности

Страница: 18 / 44

18
ES
PT
MICROTIG DC 162 / 202 PULSE
-
Set the spot time (tSPOT) from 0.1 to 20 seconds.
-
Start spot welding by pressing the torch trigger and continuing to press until the end of the set
TIG cycle.
8.4 . JOBS - Welding programmes
This machine has 20 memories for storing and repeating your welding programmes.
- To save a welding programme, set the parameters and press the button (Fig.1 - 10) until the LED P
lights up. Then press the parameter selection/setting knob for 2 seconds until the digital display
shows P1. Then turn the parameter selection/setting knob to the desired programme number.
Finally, press the parameter selection/setting knob until the digital display shows MEM.
- To access a programme: Press the key (Fig. 1 - 10) until LED P lights up. Then turn the parameter
selection/setting knob to the desired programme number. Wait 2 seconds and your programme is
available.
- When you change the parameter values, the machine automatically switches to P0.
- After switching off the machine, your programmes will still be stored.
9. ERROR DESCRIPTION
Er1 - Overheating - Switches the machine off in case of overheating due to overloading