Nintendo GameCube DOL-101 Скачать руководство пользователя страница 1

Страница: 1 / 4

GCLoader PNP Installation for DOL-101 & DOL-001 GameCube (All Regions)

Tools Needed:

•

Gamebit 4.5mm security screwdriver (NTSC-U, PAL Units Only)

•

Philips Screwdriver size no. 1

Step 1

Remove the 4 security screws shown with arrows using a game bit driver. *Some consoles use normal
Phillips screws.

Step 2

Remove the back plate and front plate. Gently pull the flex cable at the arrow location.

Содержание GameCube DOL-101

Страница 1: ...5mm security screwdriver NTSC U PAL Units Only Philips Screwdriver size no 1 Step 1 Remove the 4 security screws shown with arrows using a game bit driver Some consoles use normal Phillips screws Step...

Страница 2: ...Step 3 Remove the two screws unplug power cable and remove fan unit Step 4 Remove all screws shown with arrows...

Страница 3: ...Step 5 Remove Top DVD drive assembly Step 6 Remove DVD drive from metal shield by removing all screws as shown DOL 001 DOL 101...

Страница 4: ...er DO NOT overtighten Put the washer where the large arrow is pointing DOL 101 consoles will only use two screws DOL 001 DOL 101 Step 8 Install the top metal shell back onto the gamecube Now you can s...