All you need is a little maintenance and you’ll enjoy delicious coffee, mug after mug.
NINJA PERFECT CLEAN TECHNOLOGY
MANDATORY PHASE 2: FLUSH CYCLE
– Complete after step 10.
PHASE 1: CLEAN CYCLE
– Will take
minutes
to complete.
30
4-digit Date Code (located on plug prong): First two numbers between 32-52, last number is 16.
Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
*Descaling solution is available from ninjakitchen.com. Follow your solution’s recommended concentration level.
**Fill the water reservoir to the Travel Mug line (16 oz.) with white vinegar, then add water to Max Fill line.
†CAUTION: Do not immerse coffeemaker in any liquid.
6.
Unit will discharge enough descaling
mixture to fill vessel, then pause to
descale the boiler for 15 minutes.
DO NOT
touch any buttons during this
time. Unit may dim. Upon completion,
unit will beep 3 times and the Classic
Brew light will turn off.
11.
Empty and
clean vessel
and reservoir.†
12.
Fill reservoir to
Max Fill line with
water only.
13 .
Empty and
return the
vessel under
brew basket.
15.
Unit will discharge
enough water to
fill vessel and beep
3 times.
DO NOT
touch any buttons
during this time.
16.
Unit will beep 5 times
when complete, and the
CLEAN light will turn off.
17.
Empty and clean vessel
and reservoir.†
14.
Press CLEAN
button.
1.
CLEAN light
illuminates on
the unit.
2.
Fill reservoir to Max Fill line with
descaling solution* and water or
white vinegar** and water.
4.
Select brew size
to match vessel
used in step 3.
5.
Press CLEAN
button.
3.
Place largest available
empty vessel under
brew basket.
15
Repeat steps 13–15 until reservoir is empty.
Repeat steps 7 –9 until reservoir is empty.
10.
Unit will beep 5 times
when complete and
continue flashing until
PHASE 2: FLUSH CYCLE
(see below) is complete.
8.
Press CLEAN
button.
9.
Unit will discharge enough descaling
mixture to fill vessel, then beep 3 times.
DO NOT
touch any buttons during
this time. Unit may dim.
7.
Empty and return
the vessel under
brew basket.