NINCOAIR is brand of NINCO DESARROLLOS S.L.
Ctra. de l’Hospitalet 32
08940 Cornella Barcelona Spain
CIF B-60307725 ·
www.nincoair.com
Turn left
Right stick to left
Turn right
Right stick to right
Forward
Always goes forward when
accelerating
Helicopter take off:
The helicopter can take off after trimming.
1.
Place the helicopter in the middle of the room over a straight surface.
2.
Push the throttle stick up, the rotating speed will increase. Push up quickly before the helicopter takes off the ground.
3.
Focus on the helicopter, do not look at the transmitter
4.
Practice the up, down and stabilization movements.
Flight process:
5.
When the helicopter is flying, turn right and left the right stick: the helicopter turn to right or left over itself.
6.
When the helicopter is flying, push and pull the right stick: the helicopter goes forward and backward.
Flight environment:
Fly on a sunny day, without wind:
7.
This helicopter is recommended for indoor use (avoid the air conditioned, may affect the flight).
8.
Do not fly in extreme temperature. Do not fly in strong wind. Select a large, wide-open area to fly (4m x 5m x 2,5m).
9.
Make sure the area is far from people, animals, trees, buildings, high-voltage wire and other obstructions.
TROUBLE SHOOTING
WHAT HAPPENS
CAUSE
SOLUTION
The blades do not spin
- Switch ON / OFF in OFF position
- Battery almost exhausted
- Switch ON
- Charge the battery
Suddenly stops and felt down
- Battery almost exhausted
- Charge the battery
The helicopter does not react
- Channel selection on transmitter is not correct
- Reset the channel selection
Lost of control
- Other infrared RC vehicle is using the same
channel
- Remains under a heavy light
- Change the channel
- Change the flight location and avoid the direct light
- 7 -
