2.4 Connect to a PC
This section will guide users through setting up the SWDK2 and issuing AT
commands to a Skywire modem. For this demonstration a NL-SW-LTE-QBG96
Skywire modem will be used, but users may use any modem that uses the standard
Skywire interface.
2.4.1 SIM Insertion
Insert the SIM card for the Skywire modem into the modem's 3FF SIM interface
located on the bottom side of the modem. The gold contacts on the SIM should be
inserted so they are facing the modem's PCB.
Some Skywire modems have onboard Verizon SIMs. If the user is using the onboard
SIM for Verizon service this step can be skipped.
PN 1002634 REV 1
© NimbeLink Corp. 2021. All rights reserved.
9